Nickel Filler Metal 61
Nickel Filler Metal 61 is used for gas-tungsten-arc, gas-metal-arc, and submerged-arc welding of Nickel 200 and 201. It is also used for surfacing of steel. INCOFLUX NT100 Submerged Arc Flux is used with the submerged-arc process. The reaction of titanium with carbon maintains a low level of free carbon and enables the filler metal to be used with Nickel 201. The weld metal has good corrosion resistance, particularly in alkalies.
HAYNES® HR-160® RTW™ Filler Metal
HAYNES® HR-160® RTW™ Filler Metal is used for the gas metal arc and gas tungsten arc welding of HAYNES HR-160®. The alloy has outstanding resistance to high temperature corrosion, including sulfidation and chloride attack in reducing and oxidizing atmospheres. The alloy also is a great candidate for thermal spray applications where resistance to high temperature abrasion and corrosion are required. The RTW™ filler metal finish on the spooled wire promotes smooth feeding through welding equipment and reduced tip wear in contact tips.
INCONEL® Filler Metal 82
INCONEL Filler Metal 82 is used for gas-tungsten-arc, gas-metal-arc and submerged-arc welding of INCONEL alloys 600, 601 and 690, INCOLOY alloys 800 and 800HT, and submerged arc groove welding with this wire. For submerged-arc surfacing INCOFLUX NT100 is suitable.
INCONEL® Filler Metal 72
INCONEL Filler Metal 72 is typically used for the gas-tungsten-arc welding of INCONEL alloy 671 cladding on INCO-CLAD® 671/800HT Clad Tubing. INCONEL Filler Metal 72 is also used for the overlaying of carbon steels and stainless steels to provide a nickel-chromium alloy corrosion resistant surface. The high chromium level provides excellenty resistance to high temperature corrosion, including fuel-ash atmospheres containing sulfur and vanadium.
INCONEL® Filler Metal 72M
INCONEL Filler Metal 72M is used for the overlay cladding of ferrous materials used in high temperature applications, and the welding of nickel-chromium-iron alloy (ASTM B163, B166, B167, and B168 having UNS number N06690) to itself, and to steels, and for welding IN657 and INCO clad 671/800H, using the GTAW, GMAW, and PAW processes. Welds made with this composition are particularly resistant to high temperature oxidation, carburization, and sulfidation, and to reducing-selfidizing and metal dusting environments.
INCONEL® Filler Metal 740H
INCONEL Filler Metal 740H is used for the Gas-Metal-Arc and Gas-Tungsten-Arc welding of INCONEL alloy 740 and 740H. Filler Metal 740 (a Ni-Cr-Co alloy) is age-hardenable by the precipitation of a gamma prime second phase. The alloy is intended for service in high temperature applications for the ultra-supercritical power boilers and diesel engine exhaust valve markets.
INCONEL® Filler Metal 617
INCONEL Filler Metal 617 is used for gas-tungsten-arc and gas-metal-arc welding of INCONEL alloy 617. Because of the weld metal's high temperature strength, oxidation resistance, and metallurgical stability, the filler metal is also used for joining various dissimilar high-temperature alloys. Examples are INCOLOY alloys 800HT and 803 and cast alloys such as HK-40, HP, and HP-45 Modified.
NILO® Filler Metal CF36
NILO Filler Metal CF36 is used for gas-metal-arc, gas-tungsten-arc, and submerged-arc welding of NILO alloy 36. Filler Metal CF36, while providing freedom from solidification and reheat cracking. Argon is recommended for the GMAW-Spray process, Argon/25% helium for the GMAW-Pulsed Arc and Short-Arc processes, and INCOFLUX NT100 for the SAW process.
NILO Filler Metal 365
NILO Filler Metal 365 offers further improvements in strength and performance, and is used to weld NILO alloy 365 for fiber-reinforced epoxy-resin tooling applications. NILO Filler Metal 365 has 43% Nickel and is strengthened by additions of Ti and Nb. It is an age-hardenable alloy, strengthened by heat treatment to reach property levels well above those of conventional nickel-iron alloys. NILO Filler Metal 365 is formulated to have low thermal expansion characteristics similar to NILO alloy 365, producing high-quality, crack-free, vacuum-tight welds by the submerged-arc process using INCOFLUX 6, the gas-metal-arc process spray mode using Argon shielding gas, and the gas tungsten-arc process-pulsed mode using 75/25 Argon/Helium shielding gas, and the gas tungsten-arc process using overmatched mechanical properties in the as-welded condition. Higher values can be achieved by moderate stress-relief procedures. FM 365 also provides resistance to DDC during fabrication.
INCONEL® Filler Metal 601
INCONEL Filler Metal 601 is used for the gas-tungsten-arc welding of INCONEL alloy 601. It is the preferred welding product for all gas-tungsten-arc welding of INCONEL alloy 601. The GTAW process with INCONEL Filler Metal 601 is the only recommended joining method for applications involving temperatures over 2100°F (1150°C) or for applications at lower temperatures involving exposure to hydrogen sulfide or sulfur dioxide. The weld metal is comparable to the base metal in resistance to corrosion and oxidation.
INCONEL® Filler Metal 52MSS
INCONEL Filler Metal 52MSS is the third generation 30% chromium INCONEL® welding product designed to resist nuclear pure water intergranular stress corrosion cracking. INCONEL® Filler Metal 52MSS excellent resistance to ductility-dip cracking (DDC) or cold cracking during fabrication. Because of the low levels of aluminum and titanium, it provides remarkably "clean" weld deposits that tend to be free of inclusions oxides, and porosity. INCONEL® Filler Metal 52MSS is used for fabrication and repair of nuclear components and also exhibits good resistance to root-cracking. The good wetting and clean welds make INCONEL® Filler Metal 52MSS ideal for remote-controlled multi-pass welds in radioactively "hot" repair situations
INCONEL® Filler Metal 92
INCONEL Filler Metal 92 is used for gas-tungsten-arc and gas-metal-arc welding of austenitic and ferritic steels and nickel alloys. Applications include joining INCONEL and INCOLOY alloys to stainless steels, carbon steels, and MONEL alloys; joining MONEL alloys metal is also used for welding nickel steels. The high Ti concentration provides excellent porosity resistance in field welding applications.
INCONEL® Filler Metal 52
INCONEL Filler Metal 52 is used for gas-tungsten-arc and gas-metal-arc welding of INCONEL alloy 690. This NiCrFe welding product was developed to meet the changing needs of the nuclear industry, the higher chromium level providing greater resistance to stress- corrosion cracking in the nuclear, pure water environment. INCONEL Filler Metal 52 produces corrosion-resistant overlays on the most low-alloy and stainless steels. It can also be used in applications requiring resistance to oxidizing acids. It is useful for dissimilar joints involving INCONEL and INCOLOY alloys, and carbon, low-alloy and stainless steels and for overlaying on to steel.
INCONEL® Filler Metal 52M
INCONEL Filler Metal 52M is used for gas-tungsten-arc and gas-metal-arc welding of INCONEL alloy 690, and the overlaying of carbon steels and stainless steels to provide a nickel-chromium alloy corrosion resistant surface. The high chromium level provides excellent resistance to stress corrosion cracking in the nuclear, pure water environment. The product can also be used in applications requiring resistance to oxidizing acids. It is useful for dissimilar joints involving INCONEL and INCOLOY alloys.
INCONEL® Filler Metal 52MD
INCONEL Filler Metal 52MD is used for the gas-tungsten-arc and gas-metal-arc welding of INCONEL alloy 693, and the overlaying of carbon steels and stainless steels to provide a nickel-chromium-aluminum alloy corrosion resistant surface. The high chromium and aluminum levels provide excellent resistance to metal dusting in chemical and petrochemical applications. The product also provides excellent resistance to carburization, sulfidation, and other high temperature corrosion forms.
HASTELLOY® C-22® RTW™ Filler Metal
HASTELLOY® C-22® RTW™ Filler Metal is used for the gas metal arc, gas tungsten arc, and submerged arc welding of alloys C-22, C-276, 625 and molybdenum-bearing stainless steels. The weld metal has excellent resistance to preferential corrosive attack in various media and thus is a great candidate for overlay and cladding of carbon steels. The alloy makes a great candidate for dissimilar welding of other nickel-chromium-molybdenum alloys an stainless steels. The RTW™ filler metal finish on the spooled wire promotes smooth feeding through welding equipment and reduced tip wear in contact tips.
INCONEL® Filler Metal 622
INCONEL Filler Metal 622 is used for gas-tungsten-arc and gas-metal-arc, welding of INCONEL alloys 22 and 625, INCOLOY alloy 25-6MO, and INCOLOY alloy 825. This is also an excellent dissimilar metal welding product that offers protection against preferential weld metal corrosion when used for joining molybdenum-containing stainless steels, INCONEL alloy C-276, and INCONEL alloy 625. The high chromium content, along with the Filler Metal 622 is useful for many dissimilar joints involving INCONEL and INCOLOY alloys, and carbon, low-alloy and stainless steels. Submerged arc welding and overlaying can be done with INCOFLUX NT120 Submerged Arc Flux.
HASTELLOY® G-30® RTW™ Filler Metal
HASTELLOY® G-30® RTW™ Filler Metal is used for the gas metal arc, gas tungsten arc, and submerged arc welding of G-30® alloy. G-30® alloy is also used for welding 6-7 molybdenum-bearing stainless steels and duplex grades including 2507. The alloy has many applications in phosphoric and nitric acid productions, as well as pulp and paper fabrications. G-30® alloy is considered an overmatching filler metal for the 6-7 molybdenum bearing stainless grades and also the duplex grades including 2507.
INCO-WELD® 686CPT Filler Metal
INCO-WELD® 686CPT Filler Metal is used for gas-tungsten-arc and gas-metal-arc welding of duplex, super-duplex and super-austenitic stainless steels, as well as nickel alloys such as UNS N06059 and N06022, INCONEL alloy C-276, and INCONEL alloys 22, 625, and 686. It is also capable of being used to deposit overlays of outstanding corrosion-resistance onto a range of steels. The high alloy levels (of Cr + Mo + W) result in increased resistance to pitting, crevice and general corrosion. INCO-WELD 686CPT Filler Metal is of great value for service environments requiring general corrosion- resistance in HCl or sulfuric acid; for resistance to crevice corrosion in hot, concentrated acid chloride solutions such as sulfur dioxide saturated NaCl solutions and oxidizing chloride solutions and for resistance to intergranular attack, after sensitization in highly oxidizing environments. Submerged arc welding can be done with INCOFLUX NT120 Submerged Arc Flux.
INCO-WELD® 725NDUR Filler Metal
INCO-WELD® 725NDUR Filler Metal is an age-hardenable version of INCONEL Filler Metal 625. After post-weld heat treatment it combines the excellent corrosion resistance of the same temperature ranges for stress relieving of low alloy steels (such as AISI 4130) as the temperature range required for age-hardenable INCO-WELD 725NDUR Filler Metal. If post-weld annealing is followed by the aging treatment, even higher strength and hardness post-weld annealing is followed by the aging treatment, even higher strength and hardness values are obtained.
HASTELLOY® C-2000® RTW™ Filler Metal
HASTELLOY® C-2000® RTW™ Filler Metal is used for the gas metal arc, gas tungsten arc, and submerged arc welding of C-2000® alloy. The deposited weld metal has excellent resistance to uniform corrosion conditions in a variety of media including oxidizing and reducing environments. The alloy makes a great candidate for dissimilar joining of other nickel-chromium-molybdenum alloys and also molybdenum containing stainless steels. The RTW™ filler metal finish on the spooled wire promotes smooth feeding through welding equipment and reduced tip wear in contact tips.
HASTELLOY® X RTW™ Filler Metal
HASTELLOY® X RTW™ Filler Metal is used for the gas metal arc and gas tungsten arc welding of X alloy. The deposited weld metal has an exceptional combination of oxidation resistance, fabricability and high-temperature strength. It has also been found to be exceptionally resistant to stress-corrosion cracking in petrochemical applications. X alloy exhibits good ductility after prolonged exposure at temperatures of 1200, 1400, 1600°F (650, 760 and 870°C) for 16,000 hours. The filler metal is also a good candidate for dissimilar welding between solid solution nickel based alloys and Ni-Fe-Cr alloys. The RTW™ finish on the spooled wire promotes smooth feeding through welding equipment and reduced tip wear in contact tips.
HASTELLOY® G-35® RTW™ Filler Metal
HASTELLOY® G-35® RTW™ Filler Metal is used for the gas metal arc and gas tungsten arc welding of g-35 alloy. The weld metal has outstanding corrosion resistance to "wet process" phosphoric acid, other oxidizing acids, alkalis, and chloride-bearing media. The RTW™ finish on the spooled wire promotes smooth feeding through welding equipment and reduced tip wear in contact tips.
INCONEL® Filler Metal 625
INCONEL Filler Metal 625 is used for gas-metal-arc and gas-tungsten-arc welding of INCONEL alloy 625, INCOLOY alloy 825, INCOLOY aloy 25-6MO, and a range of high alloy austenitic and super austenitic stainless steels. It is also used for surfacing of steel, for welding 9% Ni steels, and for welding various corrosion-resistant alloys such as alloy 20. INCONEL Filler Metal 625 can be used for joining and overlaying with INCOFLUX NT100 Submerged Arc Flux. The weld metal has high strength over a broad temperature range and has resistance to localized attack such as pitting and crevice corrosion.
INCO-WELD® C-276 Filler Metal
INCO-WELD® C-276 Filler Metal is used for gas-tungsten-arc and gas-metal-arc welding of INCONEL alloy C-276 and other nickel-chromium-molybdenum alloys. It is also used for surfacing of steel. The weld metal has excellent corrosion resistance in many aggressive media and is especially resistant to pitting and crevice corrosion.
MONEL® Filler Metal 60
MONEL Filler Metal 60 is used for gas-tungsten-arc, gas-metal-arc, and submerged-arc welding of Nickel 200 and 201. It is also used for surfacing of steel. INCOFLUX NT100 Submerged Arc Flux is used with the submerged-arc process. The reaction of titanium with carbon maintains a low level of free carbon and enables the filler metal to be used with Nickel 201. The weld metal has good corrosion resistance, particularly in alkalies.
INCOLOY® Filler Metal 65
INCOLOY Filler Metal 65 is used for gas-tungsten-arc welding of INCOLOY alloy 825 and other nickel-iron-chromium-molybdenum-copper alloys of similar composition. The weld metal is highly corrosion resistant, particularly in reducing chemicals such as sulfuric and phosphoric acids. INCOLOY Filler Metal 65 can also be used for depositing overlays on carbon and low alloy steels.
HAYNES® 825® RTW™ Filler Metal
HAYNES® 825 RTW™ Filler Metal is used for the gas metal arc and gas tungsten arc welding of alloy 825 and other alloys of similar composition. The weld metal is often used as a corrosion-resistant overlay on carbon and low alloy steels. The corrosion-resistant overlay preforms well in oil and gas applications as well as reducing environments like sulfuric and phosphoric acids. The RTW™ finish on the spooled wire promotes smooth feeding through welding equipment and reduced tip wear in contact tips.
INCONEL® Filler Metal 718
INCONEL® Filler Metal 718 is used for gas-tungsten-arc welding of INCONEL alloys 718, 706 and X-750. The weld metal is age-hardenable and has mechanical properties comparable to those of the base metals.
HASTELLOY® W
HASTELLOY® W alloy is a solid-solution-strengthened superalloy that was developed primarily as a filler metal for welding of dissimilar alloys. It displays excellent dissimilar welding characteristics, and is widely used for that purpose in the gas turbine, aerospace, and chemical process industries. The properties of dissimilar weld joints made with alloy W are dependent upon the alloys joined, but are generally acceptable for a wide variety of combinations. Alloy W is also used as a wrought alloy for a limited number of ring-type applications in older gas turbine engines. HAYNES ® 242® alloy is a more modern alloy and should be considered as a substitute for alloy W in the ring application.
HASTELLOY® B-3® RTW™ Filler Metal
HASTELLOY® B-3® RTW™ Filler Metal is used for the gas metal arc and gas tungsten arc welding of B-3® alloy. The alloy has outstanding resistance to hydrochloric and sulfuric acids in the as-welded condition and excellent thermal stability. B-3® is a great candidate for overlay and cladding where resistance to hydrochloric and sulfuric acids is needed. The RTW™ filler metal finish on the spooled wire promotes smooth feeding through welding equipment and reduced tip wear in contact tips.
