AWS 5.14 ERNiCu-7
MONEL® Filler Metal 60
MONEL® Filler Metal 60 is used for gas-tungsten-arc, gas-metal-arc, and submerged-arc welding of Nickel 200 and 201. It is also used for surfacing of steel. INCOFLUX® NT100 Submerged Arc Flux is used with the submerged-arc process. The reaction of titanium with carbon maintains a low level of free carbon and enables the filler metal to be used with Nickel 201. The weld metal has good corrosion resistance, particularly in alkalies.
Weld metal deposited by MONEL® Filler Metal 60 has properties similar to those of MONEL® alloy 400. It has good strength and resists corrosion in many media, including sea water, salts, and reducing acids. The weld metal is not age hardenable and when used to join MONEL® alloy K-500 has lower strength than the base metal.
Specifications:
- Techalloy® 418
- AWS A5.14 ERNiCu-7 (UNS N04060)
- ASME II, Part C, SFA-5.14, ERNiCu-7 (UNS N04060)
- ASME IX,F-No.42
- BS 2901 (NA33)
- DIN 1736 SG-NiCu30MnTi (2.4377)
- (EN) ISO 18274 – SNi4060 (NiCu30Mn3Ti)
For manufacture to ASME III (NCA3800, NB2400), and other specifications please refer your inquiry to the Technical Department prior to order placement.
| Nominal Chemical Composition (%) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Ni+Co | C | Mn | Fe | S | Si | Cu | Al | Ti | P | Others |
| 62.0-69.0 | 0.15 max | 4.0 max | 2.5 max | 0.015 max | 1.25 max | Remainder | 1.25 max | 1.5-3.0 | 0.020 max | 0.50 |
| Minimum Mechanical Properties | |
|---|---|
| Tensile Strength (psi) | 70,000 |
| Tensile Strength (MPA) | 483 |
| Elongation (4d) % | 30 |