AWS 5.14 ERNiCrFe-7
INCONEL® Filler Metal 52
INCONEL® Filler Metal 52 is used for gas-tungsten-arc and gas-metal-arc welding of INCONEL® 690. This NiCrFe welding product was developed to meet the changing needs of the nuclear industry, the higher chromium level providing greater resistance to stress- corrosion cracking in the nuclear, pure water environment. INCONEL® Filler Metal 52 produces corrosion-resistant overlays on the most low-alloy and stainless steels. It can also be used in applications requiring resistance to oxidizing acids. It is useful for dissimilar joints involving INCONEL® and INCOLOY® alloys, and carbon, low-alloy and stainless steels and for overlaying on to steel.
Specifications:
- AWS A5.14 ERNiCrFe-7 (UNS N06052)
- ASME II, Part C, SFA-5.14, ERNiCrFe-7 (UNS N06052)
- ASME IX, F-No.43
- (EN) ISO 18274 – SNi6052 (NiCr30Fe9)
For manufacture to ASME III (NCA3800, NB2400), and other specifications please refer your inquiry to the Technical Department prior to order placement.
| Limiting Chemical Composition (%) | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ni+Co | C | Mn | Fe | S | Si | Mo | Cu | Cr | Ti | Al | P | Nb+Ta | Al+Ti | Others |
| Remainder | 0.04 max | 1.0 max | 7.0-11.0 | 0.015 max | 0.50 max | 0.50 max | 0.30 max | 28.0-31.5 | 1.0 max | 1.10 max | 0.02 max | 0.10 max | 1.5 max | 0.50 max |
| Minimum Mechanical Properties | |
|---|---|
| Tensile Strength (psi) | 80,000 |
| Tensile Strength (MPA) | 552 |
| Elongation (4d) % | 30 |