AWS 5.14 ERNiCrFe-11
INCONEL® Filler Metal 601
INCONEL® Filler Metal 601 is used for the gas-tungsten-arc welding of INCONEL® alloy 601. It is the preferred welding product for all gas-tungsten-arc welding of INCONEL® alloy 601. The GTAW process with INCONEL® Filler Metal 601 is the only recommended joining method for applications involving temperatures over 2100°F (1150°C) or for applications at lower temperatures involving exposure to hydrogen sulfide or sulfur dioxide. The weld metal is comparable to the base metal in resistance to corrosion and oxidation.
This product contains Boron and Zirconium to minimize the tendency for ductility-dip cracking, while it is especially resistant to oxide “floaters” and inclusions.
Specifications:
- AWS A5.14 ERNiCrFe-11 (UNS N06601)
- ASME II, Part C, SFA-5.14, ERNiCrFe-11 (UNS N06601)
- BS2901 NA 49
- DIN 1736 SG-NiCr23Al (2.4626)
- (EN) ISO 18274-SNi6601 (NiCr23Fe15Al)
For manufacture to ASME III (NCA3800, NB2400), AMS and other specifications please refer your inquiry to the Technical Department prior to order placement.
| Nominal Chemical Composition (%) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Ni+Co | Cr | Fe | Al | C | P | Mn | S | Si | Cu | Others |
| 58.0-63.0 | 21.0-25.0 | Remainder | 1.0-1.7 | 0.10 max | 0.03 max | 1.0 max | 0.015 max | 0.50 max | 1.0 max | 0.50 max |
| Minimum Mechanical Properties | |
|---|---|
| Tensile Strength (psi) | 94,000 |
| Tensile Strength (MPA) | 648 |
| Elongation (4d) % | 42 |